Solutions

One platform for roads, from the first survey to the last repair.

We start with road condition surveys from ordinary phone and dashcam video. Construction monitoring, DPR support and site intelligence for buildings and bridges follow, on the same maps and records.

First release

Road condition and asset intelligence

Drive a road once with a phone or dashcam. The platform maps every visible defect and roadside asset by chainage, estimates the repair work and checks the repairs afterwards.

App screen showing road health for every 500 metres of a road, with the defects found in a poor stretch

Condition assessment

AI detects and classifies visible surface defects, records their severity and location, and scores each road section by chainage.

  • Potholes
  • Cracks and surface distress
  • Rutting and deformation
  • Shoulder condition
  • Damaged road surface
  • Geotagged condition scoring

Repair estimation

The report lists mapped defects with estimated repair quantities by defect type, recommendations by location, indicative costs and a priority-based maintenance plan, for engineering review.

Before and after verification

Pre-repair video is compared with post-repair video to show whether each identified defect appears repaired, the extent of the repair and any defects that remain, with before and after images for each location.

Pre-repair video → Repair work → Post-repair video → Verification report

Roadside asset inventory

  • Road signs
  • Road markings
  • Guardrails and crash barriers
  • Culverts and drainage
  • Streetlights
  • Trees and utilities
  • Right-of-way condition
  • Encroachments

How it works

Upload or record video → AI processing → GIS mapping → Asset inventory → Condition analysis → Reports & dashboard

Works with ordinary mobile phones as well as recommended dashcams.

Next release

Construction progress monitoring

Repeat drone surveys, planned at 15-day intervals, compare visible site changes with the approved programme. Where survey coverage and accuracy allow, the system estimates progress and flags locations for verification.

What is tracked

  • Progress by chainage
  • Progress by construction stage
  • Earthwork, cutting and filling
  • Bridges, culverts and structures
  • Time-series comparison
  • Photographic evidence

Construction stage recognition

The model classifies visible construction stages and estimates progress where the imagery supports reliable measurement. A typical flexible pavement sequence looks like this, though stages vary with each project's design:

Ground level → Earthwork → Subgrade → GSB → WMM → DBM → BC → Road furniture

GSB is granular sub-base. WMM is wet mix macadam. DBM is dense bituminous macadam. BC is bituminous concrete.

Levels, cut and fill, and deviation

Original ground level, survey data and the current surface are compared to estimate cut and fill quantities and deviation from design levels. Layer thickness needs suitable survey or field measurements alongside the imagery. Where confidence is low or deviation is significant, the system marks the location as Inspection Required.

Quality indicators

Visual and survey data can flag surface defects, uneven layers, unusual material appearance and other visible irregularities that may warrant further checks. Compaction compliance has to be established with the applicable field tests.

AI quality observations are risk indicators. They tell your team where to inspect. They do not replace laboratory or field testing.

Post-construction safety inventory

After construction, the platform maps visible road markings, signs, crash barriers and delineators, and flags apparent gaps against a specified checklist. The report supports inspection; it does not replace a formal road safety audit.

Planned

AI-assisted DPR preparation

Drone and LiDAR survey data is used to generate terrain models, longitudinal profiles, cross-sections and preliminary earthwork quantities for a road Detailed Project Report (DPR). Engineering design, further investigations and statutory approvals remain separate parts of the workflow.

Alignment intelligence

Identify and compare alternative alignments against terrain, settlements, existing roads and other constraints, then generate a preliminary alignment.

Standardised survey workflow

Alignment → Drone / LiDAR survey → Point cloud → DTM / DEM → Corridor model

Automated engineering analysis

  • Existing ground profile
  • Longitudinal profile
  • Cross-sections
  • Preliminary cut, fill and earthwork quantities
  • Indicative drainage requirements
  • Likely culvert and bridge locations

DPR preparation workflow

Survey data → Engineering design → Quantities → Cost estimate → Drawings → DPR

Every stage passes through engineering review and approval. Traffic studies, geotechnical investigation, pavement and structural design, and statutory approvals remain part of the project workflow.

Planned

Site intelligence and digital twin

Site cameras and computer vision record visible construction activity and compare it with the project's BIM model. How much can be measured depends on camera coverage, model detail and the validation method used.

Observable site activity

  • Material movement
  • Labour and equipment activity
  • Construction activities
  • Work progress and productivity
  • Safety observations
  • Milestones reached

Digital twin

Site imagery and recorded progress are compared with the project BIM model to show visible differences between planned and observed work. How often it updates, and in how much detail, depends on camera coverage and the model available.

5D BIM progress

The 3D model, schedule, quantities and cost are linked to show planned against observed progress, estimated quantity completed, schedule deviation, delayed activities, work-package status and forecast completion.

Bridge stages

Foundation → Piers → Abutments → Superstructure → Deck → Approaches → Finishing
Platform

Shared data and mapping across all four modules.

All four modules use the same maps, chainage references and project records. Reusing data across projects depends on its format and on the access terms agreed with each client. Capabilities arrive with the module they belong to, so not every item below is available yet.

Data

VideoDrone imageryLiDAR / point cloudCCTVGISBIMProject schedulesDPR / BOQ data

AI

Object detectionImage segmentationChange detectionQuantity estimationAnomaly detectionDraft reports for engineer review

Intelligence

GIS mappingChainage analysisDigital twinBIM integrationConfidence scoringAlerts for locations needing inspection

Access

Web dashboardMobile app for video captureAPI for integration

Outputs

Condition and progress reportsMap layersInspection lists
Book a demo

See what one drive finds on your road.

We will walk you through a sample survey, from the video to the final report. We can also check whether road video you already have can be used.